Executing the test functions using a PC and powerconfig

In addition to its capabilities as a stand-alone test device, the TD500 can also act as a PC interface to the ETU.

If the TD500 test device is connected both to the ETU and a PC, the protective functions can be triggered from a PC on which the powerconfig software is installed. A test log for the molded case circuit breaker is generated and stored in the powerconfig project. The test log can be printed out.

Connections between ETU - TD500 - PC

Plug-in connector for insertion in the test socket on the ETU

Power supply unit

TD500-to-ETU connecting cable

USB connecting cable

TD500 test device

PC with powerconfig installed